A/V Solutions
High End Audio and Accessories
High End Audio and Accessories
Power Conditioners
Running Springs Audio power devices do not use on/off switches, meters, lights, or dials, components that are generally known create noise in the line rather than remove it! After an extensive development process, RSA selected a mixture of passive voltage regulation with a differential topology and exceedingly high-quality proprietary components. This yields a product that, actually, surpassed the original three design criteria of proper voltage regulation, noise cancellation, and protection. After six generations of refinements, this product accomplished all of our goals without limiting dynamics, current or introducing any sonic signature of its own.
Design Features
All Running Springs Audio power devices are designed and manufactured to the highest standards in our ISO 9001:2000 approved facility in Anaheim, California - USA
- Non-ferrous high-quality aluminum chassis, no magnetic interference, or damaging field effect, which can destroy inner detail, pace and roll-off high frequencies
- Internal Cardas wiring, Golden Ratio engineered with high quality copper that yields uncolored current delivery and resonance control, with a musical presentation and proper dynamic shading
- Proprietary high-frequency CNDI & DMS passive filter lowers noise floor without compromising dynamics and detail
- Proprietary platinum foil capacitors custom-designed and hand-trimmed to precision-matched +/- 1% tolerances
- Proprietary synthetic matrix hand wound inductors, far superior in resonance control and sound quality than the current generation of inductors on the market that use iron or air.
- Includes carbon fiber feet for isolation and vibration control, superior detail and greater dynamic contrast
- Internal carbon fiber resonance vibration control
- High current, sonically invisible circuit breaker that will not diminish current flow and offers unparalleled protection
- No sound degrading on/off switches or LEDs
Elgar
Elgar is RSA new opening pricepoint conditioner
offering the same quality and effectiveness as our other units and a more
affordable price. The Elgar has 6 outlets, 15A with carbon fiber faceplate and
the same basic filters that we use in other RSA products.The Elgar is the
starting point to the RSA family of products. Effective for both audio and
video, The Elgar gives everyone a chance to experience the magic of Running
Springs Audio.
- All components are designed and manufactured in our ISO 9001:2000 approved facility in Anaheim, California – USA
- Featuring CNDI and DMS filters and upgraded platinum foil capacitors
- 100% passive, non-current limiting
topography, four isolated outlets - Quieter backgrounds, increased
inner detail with raw dynamics - Carbon fiber resonance
vibration control - MSRP $999
- More Info
The Haley is an unsurpassed value. It is built to the same exacting standards
as the “top of the line” RSA units. Designed for high-current amplifiers, front-end components, and smaller home theaters. The Haley gives you a noise-free background, huge dynamics, and protection for your audio/video investment.
- 15-amp
- 1800 watts of continuous uncompressed, uncolored power
- Three isolated RSA modified BMF1 20-amp duplexes (6 outlets)
- Non-magnetic aluminum chassis
- Proprietary passive components built to +/- 1% tolerance
- 6" x 6.5" x 10.5" HWD
- 24lbs
- Hand made in the USA
- 5 year warranty
- Haley Elite (Standard power cord) MSRP$1900
- Haley Deluxe (Mongoose 5' power cord) MSRP $2500
- Haley Statement (HZ Crown Jewel 6' power cord) MSRP $3900
- More info
Duke
The Duke, designed for high-current, high-power amplifiers and subwoofer
systems, enables your amp to get the same benefits that only our front-end has
enjoyed up until now; a lower noise floor, increased dynamics and protection,
without current limitation or sonic degredation.
- 20-amp
- 2400 watts of continuous uncompressed, uncolored power
- Single isolated RSI modified BMF1 20-amp duplex (2 outlets)
- Non-magnetic aluminum chassis
- Proprietary passive components builtto +/- 1% tolerance
- 6" x 6.5" x 10.5" HWD
- 24 lbs
- Hand made in the USA
- 5 year warranty
- Duke Elite (no power cord) MSRP $1900
- Duke Deluxe (Mongoose 5' power cord) MSRP $2500
- Duke Statement (HZ Crown Jewel 6' power cord) $3900
- More info
Jaco
The RSA JACO, named after the famed fusion bassist Jaco Pastorius, offers power,
flexibility and protection without sonic compromise. A complete system solution, the
Jaco will improve your sound with increased dynamics, lowered noise floor and
expanded soundstage.
- 20-amp
- 2400 watts of continuous uncompressed, uncolored power
- Four isolated RSA modified BMF1 20-amp duplexs (8 outlets)
- Non-magnetic aluminum chassis
- Proprietary passive components built to +/- 1% tolerance
- 6" x 13" x 10.5" HWD
- 49lbs
- Hand made in the USA
- 5 year warranty
- Jaco Elite (no power cord) MSRP $3000
- Jaco Deluxe (Mongoose 5' power cord) MSRP $3600
- Jaco Statement (HZ Crown Jewel 6' power cord) MSRP $5000
- More info
Dmitri
The new RSA Dmitri is the ultimate evolution of our work in power line conditioning technology. Utilizing our new RSA platinum series capacitors and proprietary inductors, the Dmitri takes power line conditioning to the next level and beyond.
- All components are designed and manufactured in our ISO 9001:2000 approved facility in Anaheim, California – USA
- Tolerances on capacitors and inductors meet or exceed 1%
- 100% passive, non-current limiting topography
- New carbon fiber resonance vibration control
- Significantly lower noise floor and improved dynamics
- Hand made in the USA
- 5 year warranty
- Dmitri Elite (no power cord) MSRP $4500
- Dmitri Deluxe (Mongoose 5' power cord) MSRP $5100
- Dmitri Statement (HZ Crown Jewel 6' power cord) MSRP $6300
- More info
Maxim
Designed specifically for a variety of amplifiers from low powered SET’s to large high current monoblocks, the Maxim offers the ultimate in power conditioning. The Maxim compliments our award winning Dmitri. Combined, with the Dmitri handling front-end components and the Maxim the amps, these RSA power conditioners will elevate any system to a level beyond your expectations!
- All components are designed and manufactured in our ISO 9001:2000 approved facility in Anaheim, California – USA
- Featuring CNDI and DMS filters and upgraded platinum foil capacitors
- 100% passive, non-current limiting topography, four isolated outlets
- Quieter backgrounds, increased inner detail with raw dynamics
- Carbon fiber resonance vibration control
- Hand made in the USA
- 5 year warranty
- Maxim Elite (no power cord) MSRP $4300
- Maxim Deluxe (Mongoose 5' power cord) MSRP $4900
- Maxim Statement (HZ Crown Jewel 6' power cord) MSRP $6100
- More info
Mongoose Power Cord
The basic truth about most power cord products is that too many companies use them as tone controls. The method: softening hard edges that gives the illusion of a quiet background – the results: destroying the fine inner detail, pace and rhythm, smearing leading edges, limiting dynamics and collapsing the soundstage.
Using the highest quality materials and production techniques the RSA design team worked closely to design the Mongoose Power Cords to be as neutral as possible with the greatest level of current propagation.
- Perfect current delivery
- Cardas construction
- Will enhance all PLC’s
- No Color, No Tone Control
- Custom Lengths
- Available with 15amp or 20amp IEC ends
- Hand made in the USA
- 5 year warranty
- 5' - 15amp MSRP $700
- 5' - 20amp MSRP $760
- 8' - 15amp MSRP $780
- 8' - 20amp MSRP $890
- 10' - 15amp MSRP $850
- 10' - 20amp MSRP $960
- More info
HZ Crown Jewel Power Cord
The basic truth about most power cord products is that too many companies use them as tone controls. The method: softening hard edges that gives the illusion of a quiet background - the results: destroying the fine inner detail, pace and rhythm, smearing leading edges, limiting dynamics and collapsing the soundstage. Using the highest quality materials and production techniques the RSA design team developed our Power Cords to be as neutral as possible with the greatest level of current propagation.
- 60 strand LITZ proprietary SQC configuration
- Furutech connectors 15-amp or 20-amp IEC available
- Carbon fiber end cap for damping as well as RF/EMI filtering
- Perfect Power Transfer Device (PPTD) - technology to allow components the ability to operate at their optimum level
- Hand made in the USA
- 5 year warranty
- 6' - 15amp MSRP $2300
- 6' - 20amp MSRP $2400
- 8' - 15amp MSRP $2500
- 8' - 20amp MSRP $2600
- More info
PurePower™ 3000 $3995.00
• 3000VA/2100 watts continuous load, 3200 watts short duration, 6300 watts peak
• 25 amps RMS, 37 amps short duration, 75 amps peak
• 6 Hubbell 5-15/20R outlets, 2 Hubbell L5-20R locking outlets
• 30 amp input power cord with L5-30P plug included. (Must have 30 amp L5-30R wall receptacle installed)
• World's most powerful audio AC regenerator, designed for high power systems
PurePower™ 2000 $2995.00
• 2000VA/1400 watts continuous load, 2100 watts short duration, 4200 watts peak
• 16.6 amps RMS, 25 amps short duration, 50 amps peak
• 10 Hubbell 5-15R outlets
• 20 amp input locking power cord included
• World's 2nd most powerful audio AC regenerator, designed for high power amps
PurePower™ 1050 $1995.00
• 1500VA/1050 watts continuous load, 1500 watts short duration, 3150 watts peak
• 12.5 amps RMS, 18 amps short duration, 36 amps peak
• 8 Hubbell NEMA 5-15 outlets
• Ideal for high end audio and mid power 7.1 ch home theater
More info
____________________________________________________________________________________
Furutech e-TP60 with GC-303 EMI-Absorbing Internal Coating
The e-TP60 is a sophisticated, luxuriously
made power distributor that eliminates many common problems found with audio and
video components caused by massively contaminated electrical power. The AC
waveform becomes severely distorted by ground noise, voltage spikes and sags,
high frequency power supply noise from other components in your own system, plus
radiated high frequency digital noise from processors and digital interconnects.
There are also distortion products at the top and bottom of the AC waveform
created by switch-mode power supplies in electronic devices on the same circuit.
Additionally, you?re never alone; your residential AC mains supply is shared
with other apartments, homes, and businesses on the same utility transformer.
That?s why many audio and video enthusiasts notice their systems are more
enjoyable late at night or on weekends!
The beautifully crafted special grade aluminum chassis effectively shields against another common problem, RFI (Radio Frequency Interference), and a layer of Formula GC-303 blocks EMI (Electro Magnetic Interference). Internal wiring is FURUTECH μ-14 wire（14 AWG） that guarantees low resistance. Furutech Hyper Quality High Performance Receptacles are wired to the IEC AC input of the e-TP60. Receptacles feature 24k gold-plated phosphor bronze, non-magnetic conductors for stable, long lasting, optimized power transfer.
Furutech?s Two-Stage Cryogenic and Demagnetization Alpha Process
The 2-Step Cryogenic and Demagnetizing Alpha Process works in tandem with other design-in features to create the most optimized AC power transfer possible. Furutech?s total awareness and devotion to detail results in a greater sense of power, dynamics, and resolution, with cleaner, blacker backgrounds and a larger, more stable soundstage, vivid tonal colors and deeper extension at both ends of the frequency range. The e-TP60 will allow the delicacy, refinement and nuance of a performance through, along with micro- and macro-dynamics that will leave you breathlessly engaged. Displays of all types will exhibit greater, sharper resolution with less ghosting, color shift, ?snow?, or vertical and horizontal lines.
Specifications:
GC-303 is a special material that Furutech layers and bonds to the interior bottom-plate of the chassis. It actually absorbs EMI (Electromagnetic Interference) generated by the internal fittings of the unit. The e-TP80E uses no other filtering besides GC-303 so AC resistance is kept to a minimum, allowing a more resolving, powerful, dynamic, and colorful performance from your components.
The beautifully crafted special grade aluminum chassis effectively shields against another common problem, RFI (Radio Frequency Interference), and a layer of Formula GC-303 blocks EMI (Electro Magnetic Interference). Internal wiring is FURUTECH μ-14 wire（14 AWG） that guarantees low resistance. Furutech Hyper Quality High Performance Receptacles are wired to the IEC AC input of the e-TP60. Receptacles feature 24k gold-plated phosphor bronze, non-magnetic conductors for stable, long lasting, optimized power transfer.
Furutech?s Two-Stage Cryogenic and Demagnetization Alpha Process
The 2-Step Cryogenic and Demagnetizing Alpha Process works in tandem with other design-in features to create the most optimized AC power transfer possible. Furutech?s total awareness and devotion to detail results in a greater sense of power, dynamics, and resolution, with cleaner, blacker backgrounds and a larger, more stable soundstage, vivid tonal colors and deeper extension at both ends of the frequency range. The e-TP60 will allow the delicacy, refinement and nuance of a performance through, along with micro- and macro-dynamics that will leave you breathlessly engaged. Displays of all types will exhibit greater, sharper resolution with less ghosting, color shift, ?snow?, or vertical and horizontal lines.
Specifications:
- Voltage: AC 125V 50/60Hz
- Current: 15A
- Outlets: 6 Outlets
- Dimensions 200X130X60 mm
- Weight: 2 lbs.
GC-303 is a special material that Furutech layers and bonds to the interior bottom-plate of the chassis. It actually absorbs EMI (Electromagnetic Interference) generated by the internal fittings of the unit. The e-TP80E uses no other filtering besides GC-303 so AC resistance is kept to a minimum, allowing a more resolving, powerful, dynamic, and colorful performance from your components.
MSRP $350
More info
Furutech e-TP609 Power Distributor
Meticulous build quality is a large part of
the engineering equation. Furutech Pure Transmission quality turns a macro lens
on every element of power and signal transfer applying optimized engineering
solutions to well-known problems such as contact resistance, EMI and RFI
rejection, grounding, and using the best materials and processes
available.
Formula GC-303
GC-303 is a special material Furutech bonds to the interior bottom-plate of the chassis (see illustration below) that absorbs EMI (Electromagnetic Interference) generated by the internal fittings of the unit. The e-TP 609 uses no filtering besides Formula GC-303 so AC resistance is kept to a minimum, allowing a more resolving, powerful, dynamic, and colorful performance from your components.
Furutech?s Patent-Pending Axial Locking System
Furutech designed a special locking screw (see illustration below) that anchors each duplex receptacle preventing oscillation and enhancing long-term stability. Further, a special 3M material isolates the duplex outlets from resonance. Total attention to detail: Each Axial Lock is torqued to perfection to work with the 3M resonance control material, with 4 spikes provided to mount the entire unit.
Features:
Formula GC-303
GC-303 is a special material Furutech bonds to the interior bottom-plate of the chassis (see illustration below) that absorbs EMI (Electromagnetic Interference) generated by the internal fittings of the unit. The e-TP 609 uses no filtering besides Formula GC-303 so AC resistance is kept to a minimum, allowing a more resolving, powerful, dynamic, and colorful performance from your components.
Furutech?s Patent-Pending Axial Locking System
Furutech designed a special locking screw (see illustration below) that anchors each duplex receptacle preventing oscillation and enhancing long-term stability. Further, a special 3M material isolates the duplex outlets from resonance. Total attention to detail: Each Axial Lock is torqued to perfection to work with the 3M resonance control material, with 4 spikes provided to mount the entire unit.
Features:
- Beautifully-crafted special grade aluminum chassis
- Effectively shields against RFI (Radio Frequency Interference)
- Internal layer on bottom plate of Formula GC-303
- Effectively shields against EMI (Electro Magnetic Interference)
- Internal wiring: Furutech Alpha-22 conductor at 3.8 sq. mm (< 12 AWG)
- Guarantees low electrical resistance
- Pure Transmission FP-20A(R) High Performance Rhodium-Plated Receptacles
- Each duplex separately ?star-wired? to High Performance FI-09(R) IEC AC input
- Separate conductor sets on each duplex
- Rhodium-plated phosphor bronze, non-magnetic conductors for stable, long lasting, optimized power transfer
- Furutech?s Axial Locking System lowers receptacle resonance by a factor of 10
- Outlets: 6 Outlets "Starwired"
- Input: 15A/125V IEC
- Rated: 15A/125V
- Dimensions: 266mm (W) x 130mm (D) x 56mm (H)
- Weight: 6.27 lbs.
MSRP $1229
More info
Furutech Daytona 303 Multi Mode Power Filter
The Daytona: 24 Hour Protection for Pro A/V
and High Performance Enthusiasts
All enthusiasts are looking for the same qualities: Verisimilitude to the original event, a sense of engagement promoting suspension of disbelief, an immersion in audio and video experience. To engage without effort requires meticulous preparation of the entire playback chain especially including the AC mains supply.
The Daytona 303 is a sophisticated, luxuriously made single-chassis power distributor and filtering unit that eliminates many common problems caused by massively contaminated electrical power lines. The AC mains waveform is heavily distorted by ground noise, voltage spikes and sags, high frequency power supply noise from other components in your own system, plus high frequency digital noise radiating from processors and digital interconnects.
There are also distortion products at the top and bottom of the AC waveform created by switch-mode power supplies in small electronics and charging devices on the same circuit. Additionally, you?re never alone; your residential AC supply is shared with other apartments, homes, and businesses on the same utility transformer. That?s why many audio and video enthusiasts notice their systems are more enjoyable late at night or on weekends!
Under the Hood
Like a Daytona GT racer, the Furutech Daytona 303 is purpose-made to comprehensively protect your audio and video system with 5250 joules of surge protection plus 3 types of filtering that dramatically reduces induced, radiated and ground-borne noise. Micro-circuits monitor line voltage and disconnects instantly if dangerous over- or under-voltages occurs, then reconnects once the power returns to safe levels.
The Daytona also features three ultra-advanced isolating filter sections including two analog, two digital, plus another pair of ultra-high-current audio filters. The Daytona also sports 10 surge-protected AC outlets, 6 Digital filtered outlets (Filter 1, 2 and 3), plus 2 ultra-high-current, 4 unfiltered outlets (Direct 1 and 2). Also 3 pair of protected coaxial connections and 1-in/2-out fully-protected phone line connections.
On the Track
The Daytona 303 relieves your system of flat, hard, and grainy high frequencies, a thick and bloated midrange over wooly bass, a loss of air, detail and soundstage instability. On video displays the picture resolution is sharper, with no ghosting, color shift, snow, or vertical and horizontal lines to spoil the view. If this sounds familiar, you need a Furutech Daytona 303!
All enthusiasts are looking for the same qualities: Verisimilitude to the original event, a sense of engagement promoting suspension of disbelief, an immersion in audio and video experience. To engage without effort requires meticulous preparation of the entire playback chain especially including the AC mains supply.
The Daytona 303 is a sophisticated, luxuriously made single-chassis power distributor and filtering unit that eliminates many common problems caused by massively contaminated electrical power lines. The AC mains waveform is heavily distorted by ground noise, voltage spikes and sags, high frequency power supply noise from other components in your own system, plus high frequency digital noise radiating from processors and digital interconnects.
There are also distortion products at the top and bottom of the AC waveform created by switch-mode power supplies in small electronics and charging devices on the same circuit. Additionally, you?re never alone; your residential AC supply is shared with other apartments, homes, and businesses on the same utility transformer. That?s why many audio and video enthusiasts notice their systems are more enjoyable late at night or on weekends!
Under the Hood
Like a Daytona GT racer, the Furutech Daytona 303 is purpose-made to comprehensively protect your audio and video system with 5250 joules of surge protection plus 3 types of filtering that dramatically reduces induced, radiated and ground-borne noise. Micro-circuits monitor line voltage and disconnects instantly if dangerous over- or under-voltages occurs, then reconnects once the power returns to safe levels.
The Daytona also features three ultra-advanced isolating filter sections including two analog, two digital, plus another pair of ultra-high-current audio filters. The Daytona also sports 10 surge-protected AC outlets, 6 Digital filtered outlets (Filter 1, 2 and 3), plus 2 ultra-high-current, 4 unfiltered outlets (Direct 1 and 2). Also 3 pair of protected coaxial connections and 1-in/2-out fully-protected phone line connections.
On the Track
The Daytona 303 relieves your system of flat, hard, and grainy high frequencies, a thick and bloated midrange over wooly bass, a loss of air, detail and soundstage instability. On video displays the picture resolution is sharper, with no ghosting, color shift, snow, or vertical and horizontal lines to spoil the view. If this sounds familiar, you need a Furutech Daytona 303!
More info
____________________________________________________________________________________________
Perfect Wave Power Plant 5
Features
- Regenerated AC power
- Low distortion sine wave
- 100 times lower output impedance
- MultiWave and CleanWave
- Quiet running
- Regulated AC
- 1000 watt continuous output power
- 50 amps peak power
- THD analyzer
- Real time oscilliscope
- Touch screen
- Variable output voltage
- Web control for scheduling and reporting
- Individual zone controls from front panel
- Nano Crystalline filters
- 8 Power Port AC receptacles (US unit)
- Solid copper delivery system
Benefits
- True dynamic voltage regulation
- Better bass from equipment
- Real isolation
- Protection for everything connected
- Lowers distortion by 10 times
- Ultra low output impedance
- Superior noise reduction
- Delayed turn on for proper startup
- Scheduling equipment shut down and turn on saves energy
- Protect satellite or TV as well
- Harmonic analyzer gives complete visibility of your power
- Real time oscilliscope gives before and after results
- MSRP $2999.00
- More info
Perfect Wave Power Plant 10
Features
- Regenerated AC power
- Low distortion sine wave
- 100 times lower output impedance
- MultiWave and CleanWave
- Quiet running no fans
- Regulated AC
- 1250 watt continuous output power
- 70 amps peak power
- THD analyzer
- Real time oscilliscope
- Touch screen
- Variable output voltage
- Web control for scheduling and reporting
- Individual zone controls from front panel
- Nano Crystalline filters
- 10 Power Port Premier AC receptacles (US unit)
- Solid copper delivery system
Benefits
- True dynamic voltage regulation
- Better bass from equipment
- Real isolation
- Protection for everything connected
- Lowers distortion by 10 times
- Ultra low output impedance
- Superior noise reduction
- Delayed turn on for proper startup
- Scheduling equipment shut down and turn on saves energy
- Protect satellite or TV as well
- Harmonic analyzer gives complete visibility of your power
- Real time oscilliscope gives before and after results
- MSRP $4999.00
- More info
__________________________________________________________________________________________
Oyaide MT-UB DIY Outlet Strip
The body is made of 2.0mm thick brass board which is highly rigid and has excellent vibration damping property. For Its surface treatment, a combination of nickel and chrome plating is applied to control the hardness of the body. Coupled with the shielding effect of brass, nickel plating reduces exogenous noise in wide frequency range.For the foot of MT-UB, we specially employed accurately machined brass spikes for the better separation from the floor.
The mounting poles are set up not only for mounting receptacles but also for minimizing the resonance between receptacles and chassis. Moreover, for the perfect insulation, we put urea resin washers on both sides of mounting flame of receptacles. These enhance power and energy of sound sources. Simultaneously, there have excellent vibration damping property with the heavy chassis.
There is a hole for attachment of IEC inlet on the side of MT-UB. However, for who wants to attach a power cable directly to the MT-UB, we prepared optional cable clamp and framing plate.
Specifications:
- Main chassis: 2.0mm chrome plated brass
- Receptacles: 2pcs (4outlets) UL style
- Connection: IEC320 socket or Cable Clamp
- Dimension(mm): W70xH50xL270
- Weight (Kg): 1.25Kg
- Main chassis: 2.0mm chrome plated brass
- Oyaide, Furutech and WattGate AC receptacles are available
- MSRP $300
- More info
ELITE-15i
LINEAR FILTERING AC POWER SOURCE
| Current rating: | Input - 15 amp capacity required Output - 15 amps RMS (maximum, all outlets combined - continuous) |
| Linear Noise Attenuation: | Tranverse (Differential) Mode: > 40 dB from 10kHz. - 100kHz > 80 dB from 2 kHz 0 100 kHz. – 1 GHz. (Linear attentuation curve from 0.05 – 100 ohms line impedance) |
| Outlets: | 1 (linearly filtered outlet - front) 4 (linearly filtered outlet - rear panel) 2 (linearly filtered outlets with additional ultrasonic filtering for digital or video components) |
| Transient Voltage Surge Suppression: | 120 VAC - Series Multi-Stage Protection - Non-sacrifictial with Zero Ground Contaminaion Extreme Voltage Shutdown Telco Cable / Satellite (less than .1dB insertion loss) |
| Dimensions: | 2.15' H x 17' W x 14.75' D (Standard 1 RU height without feet) |
| Weight: | 11 lbs. |
| Power Consumption: | 6 Watts for display and control circuits independent of actual load |
| Safety Agency Listing: | NRTL-C |
| Warranty: | The Furman Elite-15i is protected by a three year limited warranty covering defects in materials and workmanship. (See manual for specific details) |
MSRP $
More info
ELITE-15 DM i
LINEAR FILTERING AC POWER SOURCE
LINEAR FILTERING AC POWER SOURCE
| Current rating: | Input: 15 amps Output: 15 amps RMS (maximum, all outlets combined - continuous) |
| Linear Noise Attenuation: | Transverse (Differential) Mode: > 40 dB from 10Khz. - 100 kHz. >80 dB from 2 Khz. - 100 kHz. — 1GHz. (Linear attenuation curve from 0.05 – 100 ohms line impedance) |
| Outlets: | 9 (linearly filtered outlet - rear panel -(6) switching -
12V triggered) 4 (linearly filtered outlets with additional ultrasonic filtering for diital or video components - (2) switching - 12V triggered) |
| Transient Voltage Surge Suppression: | 120 VAC - Series Multi-Stage Protection - Non-Sacrificial
with Zero Ground Contamination. Extreme Voltage Shutdown Telco Cable / Satellite (less than .1dB insertion loss) |
| Dimensions: | 4” H x 17” W x 14.75” D (Standard 2 RU height without feet) |
| Weight: | 14 lbs. |
| Power Consumption: | 12 Watts for display and control circuits independent of actual load. |
| Safety Agency Listing: | NRTL-C |
| Warranty: | The Furman Elite-15 DM i is protected by a three year limited warranty covering defects in materials and workmanship. (see manual for details) |
MSRP $
More info
ELITE-15 PF i
LINEAR FILTERING AC POWER SOURCE
LINEAR FILTERING AC POWER SOURCE
| AC Current Capacity: | Input - 15 Amp capacity required Output - 11-15 Amps RMS (maximum, all outlets combined - continuous) |
| Linear Noise Attenuation: | Transverse (Differential) Mode: >40 dB from 10Khz. - 100 kHz. >80 dB from 2 Khz. - 100 kHz. – 1GHz. (Linear attenuation curve from 0.05 – 100 ohms line impedance) |
| Outlets: | 1 (linearly filtered outlet - front panel) 4 (linearly filtered outlet - rear panel, 2 switched via 12V trigger) 4 (linearly filtered outlets with additional ultrasonic filtering for digital or video components, 2 switched via 12V trigger) 4 (power factor corrected amplifiler outlets - 3 amps RMS reserve - resistive load - over 45 amps peak charge, 2 switched with 5 second delay via 12V trigger) |
| Transient Voltage Surge Suppression: | 120 VAC - Series Multi-Stage Protection - Non-Sacrificial
with Zero Ground Contamination. Extreme Voltage Shutdown Telco Cable / Satellite (less than .1dB insertion loss) |
| Dimensions: | 4' H x 17' W x 14.75' D (Standard 2 RU height without feet) |
| Weight: | 15 lbs. |
| Power Consumption: | 12 Watts for display and control circuits independent of actual load. |
| Safety Agency Listing: | NRTL-C |
| Warranty: | The Furman Elite-15 PF i is protected by a three year limited warranty covering defects in materials and workmanship. (see manual for details) |
MSRP $
More info
ELITE-20 PF i
ULTRA-LINEAR AC POWER SOURCE
ULTRA-LINEAR AC POWER SOURCE
| AC Current Capactiy: | Input - 20 Amp capacity required Output - 16-20 Amps RMS (maximum, all outlets combined - continuous) |
| Linear Noise Attenuation: | Transverse (Differential) Mode: > 40 dB from 5Khz. - 100 kHz. >80 dB from - 100 kHz. – 1GHz. Common Mode: >40dB from 10Hz. – 30 kHz. >20 from 40 kHz. – 1MHz. (Linear attenuation curve from 0.05 – 100 ohms line impedance) |
| Outlets: | 1 (ultra-linear filtered outlet - front panel) 8 (ultra-linear filtered outlets with additional bi-directional ultrasonic filtering for each analog or video components bank) 4 (power factor corrected amplifier outlets – 4 amps RMS reserve - resistive load - over 55 amps peak charge) |
| Transient Voltage Surge Suppression: | 120 VAC - Series Multi-Stage Protection - Non-Sacrificial
with Zero Ground Contamination. Extreme Voltage Shutdown Telco Cable / Satellite (less than .1dB insertion loss) |
| Dimensions: | 4' H x 17' W x 14.75' D (Standard 2 RU height without feet) |
| Weight: | 18 lbs. |
| Power Consumption: | 12 Watts for display and control circuits independent of actual load. |
| Safety Agency Listing: | NRTL-C (pending) |
| Warranty: | The Furman Elite-20 PF i is protected by a three year limited warranty covering defects in materials and workmanship. (see manual for details) |
MSRP $
More info
IT-REFERENCE 7i
SUPPLEMENTAL DISCRETE SYMMETRICAL AC POWER ISOLATION
SUPPLEMENTAL DISCRETE SYMMETRICAL AC POWER ISOLATION
| AC Current Capacity: | Input - 7 Amp capacity required (any 15 - 20 amp outlet
is acceptable) Output - 7 Amps RMS (maximum, all outlets combined - continous) |
| Linear Noise Attenuation: | Tranverse (Differential) Mode: > 40 dB from 10 kHz - 100 kHz, > 80 dB from 100 kHz - 1GHz (Linear attenuation curve from 0.05 - 100 ohms line impedance) Common Mode: > 75 dB, 10 Hz - 50 kHz, > 40 dB 50 kHz - 1 MHz |
| Outlets: | 4 symmetrical balanced outlets |
| Transient Voltage Surge Suppression: | 120 VAC - Series Multi-Stage Protection - Non-Sacrificial
with Zero Ground Contamination. (188 V peak clamping & 6000V / 3000A input) Extreme Voltage Shutdown (>137 VAC) Telco Cable / Satellite (less than .1dB insertion loss) |
| Dimensions: | 4” H x 17” W x 14.75” D (Standard 2 rack unit height without feet) |
| Weight: | 46 lbs. |
| Power Consumption: | 8.5 Watts for display and control circuits independant of actual load |
| Safety Agency Listing: | NTRL-C |
| Warranty: | The IT-REFERENCE 7i is protected by a five year limited warranty covering defects in materials and workmanship. (See manual for details) |
MSRP $
More info
IT-REFERENCE 15i
DISCRETE SYMMETRICAL AC POWER SOURCE
DISCRETE SYMMETRICAL AC POWER SOURCE
| AC Current Capacity: | Input - 15 Amp capacity required Output - 11 - 15 Amps RMS * (maximum, all outlets combined - continous) |
| Linear Noise Attenuation: | Tranverse (Differential) Mode: > 40 dB from 10 kHz - 100 kHz, > 80 dB from 100 kHz - 1GHz (Linear attenuation curve from 0.05 - 100 ohms line impedance) Common Mode (video outlets): > 75 dB, 10 Hz - 50 kHz, > 40 dB 50 kHz - 1 MHz |
| Outlets: | 2 symmetrical balanced 5 linearly filtered 4 Power Factor corrected amplifier circuit - 4 amps RMS reserve - resistive load - over 55 amps peak charge |
| Transient Voltage Surge Suppression: | 120 VAC - Series Multi-Stage Protection - Non-Sacrificial
with Zero Ground Contamination. (188 V peak clamping & 6000V / 3000A input) Extreme Voltage Shutdown (>137 VAC) Telco Cable / Satellite (less than .1dB insertion loss) |
| Dimensions: | 4” H x 17” W x 15.625” D (Standard 2 rack unit height without feet) |
| Weight: | 50 lbs. |
| Power Consumption: | 8.5 Watts for display and control circuits independant of actual load |
| Safety Agency Listing: | C-ETL |
| Options: | Rear rack mounting ears for standard 19” racks available (RRKIT-REF 15) |
| Warranty: | The IT-REFERENCE 15i is protected by a five year limited warranty covering defects in materials |
MSRP $
More info
IT-REFERENCE 20i
DISCRETE SYMMETRICAL AC POWER SOURCE
DISCRETE SYMMETRICAL AC POWER SOURCE
| AC Current Capacity: | Input - 20 Amp capacity required Output - 12 - 20 Amps RMS * (maximum, all outlets combined - continous) |
| Linear Noise Attenuation: | Tranverse (Differential) Mode: > 40 dB from 10 kHz - 100 kHz, > 80 dB from 100 kHz - 1GHz (Linear attenuation curve from 0.05 - 100 ohms line impedance) Common Mode (video outlets): > 75 dB, 10 Hz - 50 kHz, > 40 dB 50 kHz - 1 MHz |
| Outlets: | 8 symmetrical balanced 4 Power Factor corrected amplifier circuit - 4 amps RMS reserve - resistive load - over 80 amps peak charge |
| Transient Voltage Surge Suppression: | 120 VAC - Series Multi-Stage Protection - Non-Sacrificial
with Zero Ground Contamination. (188 V peak clamping & 6000V / 3000A input) Extreme Voltage Shutdown (>137 VAC) Telco Cable / Satellite (less than .1dB insertion loss) |
| Dimensions: | 5.75” H x 17” W x 16.25” D (Standard 3 rack unit height without feet) |
| Weight: | 81 lbs. |
| Power Consumption: | 8.5 Watts for display and control circuits independant of actual load |
| Safety Agency Listing: | C-ETL |
| Options: | Rear rack mounting ears for standard 19” racks available (RRKIT-REF 20) |
| Warranty: | The IT-REFERENCE 20i is protected by a five year limited warranty covering defects in materials and workmanship. (See manual for details) |
MSRP $
More info
IT-REFERENCE 20i
DISCRETE SYMMETRICAL AC POWER SOURCE
DISCRETE SYMMETRICAL AC POWER SOURCE
| AC Current Capacity: | Input - 20 Amp capacity required Output - 12 - 20 Amps RMS * (maximum, all outlets combined - continous) |
| Linear Noise Attenuation: | Tranverse (Differential) Mode: > 40 dB from 10 kHz - 100 kHz, > 80 dB from 100 kHz - 1GHz (Linear attenuation curve from 0.05 - 100 ohms line impedance) Common Mode (video outlets): > 75 dB, 10 Hz - 50 kHz, > 40 dB 50 kHz - 1 MHz |
| Outlets: | 8 symmetrical balanced 4 Power Factor corrected amplifier circuit - 4 amps RMS reserve - resistive load - over 80 amps peak charge |
| Transient Voltage Surge Suppression: | 120 VAC - Series Multi-Stage Protection - Non-Sacrificial
with Zero Ground Contamination. (188 V peak clamping & 6000V / 3000A input) Extreme Voltage Shutdown (>137 VAC) Telco Cable / Satellite (less than .1dB insertion loss) |
| Dimensions: | 5.75” H x 17” W x 16.25” D (Standard 3 rack unit height without feet) |
| Weight: | 81 lbs. |
| Power Consumption: | 8.5 Watts for display and control circuits independant of actual load |
| Safety Agency Listing: | C-ETL |
| Options: | Rear rack mounting ears for standard 19” racks available (RRKIT-REF 20) |
| Warranty: | The IT-REFERENCE 20i is protected by a five year limited warranty covering defects in materials and workmanship. (See manual for details) |
MSRP $
More info
____________________________________________________________________________________